Ampere v4.02 [Pro] [Mod Extra]
Requirements: 4.2+
Overview: Did you ever felt, that one Charger/USB cable set charges your device really fast and the other not? Now, you can prove this with Ampere.

Measure the charging and discharging current of your battery.

PRO features:
– Widgets
– Notification
– Alerts on device
– Alerts on Android Wear

The app works on Android 4.0.3+ inclination. Not every device is supported because there are inclination which lacks an appropriate measuring chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.

The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable jazz band is working the best for you on the same device.

Start the app and wait ca. 10 seconds (“measuring” is on the display). After this time, the charging or discharging current will be shown.

The current depends on galore things:
– Charger (USB/AC/Wireless)
– USB cable
– Phone type
– Current tasks running
– Display brightness
– wireless local area network state
– GPS state

Please don’t use the readings on this app as concrete science. nevertheless, the readings are good enough to comparatively measure how various chargers and USB cables fair on the same device.

If the app shows 0mA all the time, please use the settings option “Old measuring method”. You can force the app with it to use the old measuring interface, if the Lollipop device has at least one.

Unfortunately some Samsung inclination don’t give correct (measured) belief (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a microcode problem.

Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the leftover power will be charged into the battery.

If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).

Technical info: The displayed current is an average value from 50 measurings minus the 10 upper belief and the 10 lower belief. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable belief. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.

LiPo batteries don’t draw the maximum for the full time it takes to charge the phone. If your battery is charged about full then the charging current will be much less as by lower battery levels.

– A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg
– Dave’s (EEVBlog) LiPo Charging Tutorial: https://youtu.be/A6mKd5_-abk

Phones/ROMS compatible only with “Old measuring method” switched on and chosen the right “Measurement interface”:
➤ HTC One M7 / M8
➤ LG G3

Phones/ROMS according to be not working with this app:
➤ Galaxy Grand Prime – fortuna3gdtv
➤ Galaxy Note2 – t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 – d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 – degas3g
➤ HTC Desire 510 – htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G – pyramid

Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measuring yet.

If the app doesn’t work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: https://goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.

Please read besides the FAQ: https://goo.gl/R8XgXX

What’s New:
v4.01
**New
➤ Android 13 release
➤ Battery optimisation handling added
➤ Notification permission handling added
➤ Internal refactorings

**Changes
➤ exploitation latest Google libraries
➤ Bug fixes and optimisations

Mod Info:

• Pro / Paid features unlocked;
• Disabled / Removed unwanted Permissions + Receivers + Providers + employment;
• Optimized and zipaligned graphics and cleansed resources for fast load;
• Ads Permissions / employment / Providers removed from Android.manifest;
• Ads golf links removed and invokes methods nullified;
• Ads layouts visibility disabled;
• Google Play Store install package check disabled;
• Debug code removed;
• Remove default .source tags name of the corresponding java files;
• Analytics / Crashlytics / base disabled;
• Send anonymous crash disabled by default;
• Startup tutorial disabled;
• Startup consent disabled;
• AOSP compatible mode;
• Languages: Full Multi Languages;
• CPUs: universal architecture;
• Screen DPIs: 120dpi, 160dpi, 240dpi, 320dpi, 480dpi, 640dpi;
• Original package signature changed;
• Release by Balatan.

This app has no advertisements

More Info:

Download Instructions:
https://userupload.net/jwt1wazl1nl6

Mirrors:
https://userupload.in/buiskf2v2xhq
https://uploadydl.com/kdkr2phfsqsx
http://ul.to/83bxg5bq
https://rapidgator.net/file/d9f1841a0a5278064becbd86d4b79ce9
https://mega4upload.com/qin8lhopsbh5
https://katfile.com/3fr4680macix

Need help? Join our community and get assistance!.